How to Reattach the Rearview Mirror

In case you are losting your car rear view mirror,What would happned?and what will you do ?

One of the most irritating occurrences for a driver is losing their rear view mirror. Not lost exactly, just that it is no longer attached to the windshield. Besides being illegal and unsafe, not having a rear view mirror is a serious inconvenience to a driver. The good news is it is fairly easy and inexpensive to reattach the mirror.

The first thing what you need to do is preparing all of your necessary supplies. A quick trip to the auto parts store will do nicely. Pick up a rearview mirror adhesive kit. It will have a strong glue vial and a supply of accelerant to speed up the glue curing process.

A small Allen wrench and thin, razorblade scraper will be helpful as well. Get together some odds and ends from the house too. Masking tape and, if the weather is chilly, a hair dryer or heat gun will be helpful.

Now that everything is ready it’s time to reattach the mirror. It’s a good idea to leave the car’s windows down during the process. The fumes from the glue can be a little overwhelming.

Use the scraper to remove any old glue from the windshield. Allowing the car windshield to warm up in the sun or warming the glass with the hair dryer or heat gun will loosen it as well.

It is usually pretty obvious where the rearview mirror should be placed due to residue from the original mirror. However if that is not the case use your tape measure to mark a place halfway across the windshield and about 4 inches from the headliner.

Make sure the area of glass that is to be home to your rearview mirror is clean of the old glue and dirt or oil. The base plate of mirror should be scraped and clean of residue as well. The old glue will prohibit the new adhesion from sticking properly.

The next step is to place the rearview mirror. Using the glue from the kit, apply an adequate amount to the clean glass. Remove the mounting base from the mirror with the Allen wrench.

Working with the mirror attached is cumbersome and awkward. Apply the accelerant to the base plate and allow the accelerant time to dry. Both surfaces are now prepped for adhesion.

You are already very near. Using a large plastic, behind the base, according to firmly in the medial point windshield. Must keep in situ for at least two minutes.

This base should stay on 15 minutes long minimum and better. If it is convenient for you to heal overnight is an excellent idea.

The bottom, have enough time to do, rescrew mirror, its base. Don't try to test and pull in the rearview car mirror. This will be very good, if you are lucky,the work will continue to live for your car.


Maybe you also like this article,visit: http://espow.livejournal.com/36660.html